That is why we combine modern energy-efficient technologies, our own renewable electricity generation, environmentally considerate manufacturing processes and thoughtful design when producing our parcel lockers. The result is products that meet high standards of quality, safety and operational reliability while helping to reduce environmental impacts throughout their life cycle.
of our production electricity comes from our own solar installation
material utilisation in powder coating thanks to recycling
less powder coating thanks to considered design
of outdoor operation
Our own solar power covers around a third of our electricity use
An important step along that road is our own solar installation. On the roofs of our production halls, 902 solar panels deliver an installed capacity of 405.9 kWp.
That covers around a third of the electricity used in production from our own renewable generation.
We’ve added a battery storage system with a usable capacity of 182.64 kWh. It stores the electricity we generate so we can draw on it when demand rises, or when the panels aren’t producing.
installed capacity of our solar installation
solar panels on the roofs of our production halls
usable capacity of our battery storage system
Together, solar and storage improve our energy independence, smooth out consumption peaks and make operations across the whole site more stable and efficient.
Modern production technology, lower energy demand
Sustainability starts with the choice of manufacturing technology. At ALFA 3, we’ve long favoured solutions that combine precision, efficiency and low energy consumption.
Wherever possible, we therefore work with servo-electric technology. Compared with conventional hydraulic systems, it uses less energy and allows more precise control.

That reduces energy consumption and operational losses without compromising on quality or repeat accuracy. Energy efficiency doesn’t come at the expense of the end product, then. It’s simply part of technical progress.
Powder coating with around 95% material utilisation
Our modern powder coating line plays an important role in production, because it uses coating material efficiently and keeps waste low.

Unused powder coating is recovered, which gives us a material utilisation rate of around 95%.
Powder that doesn’t adhere to the workpiece during application is extracted, captured in the recycling system and blended with fresh powder under controlled conditions. The reconditioned material then goes back into the production process.
Application
powder is sprayed onto the workpiece
Extraction
powder that doesn’t adhere to the workpiece
Recycling system
unused powder is captured
Blending
with fresh powder under controlled conditions
Material losses and the waste generated by surface treatment fall considerably as a result.
There’s another point worth making: powder coating produces virtually no emissions of volatile organic compounds (VOCs), unlike solvent-based liquid paint systems.
For chemical surface pre-treatment we use certified materials. The resulting wastewater is treated and neutralised under controlled conditions, then processed at a specialist external treatment facility.
Considered design saves around 60% powder coating
Responsible use of materials begins at the drawing board.
We develop our parcel lockers with high mechanical resilience, long-term corrosion protection and efficient material use in mind.
To achieve that, we use materials and solutions that meet corrosion protection categories C4 and C5, and that hold up in demanding outdoor environments.

Because we select materials deliberately, not every structural component needs coating. Powder coating goes primarily onto the visible external panels.
Compared with a design in which every component is coated, that reduces powder coating consumption by around 60%.
Less coating material also means less energy during surface treatment, and more efficient use of our production resources.
Manufacturing without welding as standard
We don’t use welding as standard in the manufacture of our parcel lockers.
That brings several advantages. Welding fumes and the associated emissions are avoided, the rework involved in finishing welded joints disappears, and the working environment improves for our staff.

It also makes production easier to organise efficiently.
More than 25 years of service life: sustainability that adds up
One of the key principles in our approach is the long service life of our products.
Robust construction, resilient materials and high-quality surface treatment make long-term use possible even in demanding climates.

And the benefit isn’t only environmental. For operators, a long service life means a lower total cost of ownership, less frequent replacement investment and more efficient use of the capital they’ve committed.
The modular construction matters here too. Individual components can be replaced and the technology updated over time, without replacing the entire unit.
So the installation adapts to new technical and operational requirements instead of reaching the end of its life prematurely.
It’s precisely this combination of durability, repairability and upgradeability that we see as one of the central pillars of a genuinely sustainable product.
Less waste, more circularity
Right from product development and production planning, the aim is to use material as fully as possible and keep waste to a minimum.
Whatever can’t be used further in production is carefully separated and handed over to approved disposal and recovery companies in line with current legal requirements.
We also favour materials that recycle well. The steel and other metal components in our parcel lockers can be recovered as secondary raw material at the end of their working life.
In doing so we support the principles of the circular economy: keeping materials in circulation as long as possible, reducing waste and limiting consumption of primary raw materials.
Manufacturing
materials used as fully as possible, waste carefully separated
Operation
more than 25 years outdoors
Repairs and upgrades
components replaced thanks to the modular design
Material recovery
steel and metals as secondary raw material
Combined with the modular design and the option to repair or upgrade in stages, this approach covers the entire product life cycle: from manufacturing, through many years of operation, to eventual material recovery.
Sustainability as part of our long-term strategy
We’re convinced that responsible manufacturing and high quality aren’t mutually exclusive.
Our investments in the solar installation, the battery storage, energy-efficient technology and modern surface treatment are concrete steps that reduce the environmental impact of our production, step by step.
We give the products themselves the same attention. Long service life, mechanical resilience, modularity and the option of technical upgrades create real value for customers and for the operators of logistics networks.
.jpg)
You can find out more about our products and solutions at www.alfa3.eu.
